AMERICAN TRADITIONS EURO LINE

WOOD SLAB PANEL

1. Frameless

Ends are 3/4″ birch plywood with 5mm edge banding.

2. Tops & Bottoms

Top and bottom panels are 3/4″ thick birch plywood.  

Tops and bottoms are dadoed into the end panels.

3. Toe Kicks

Toe kicks shall be 3/4″ thick x 4″ tall birch plywood.

4. End Panels

End panels are 3/4 ” thick birch plywood.

5. Adjustable Shelves

Adjustable shelves are 3/4″ thick birch plywood.

6. Back Panels

Backs are 1/4″ birch plywood. Backs are routed into End Panels, Bottoms, and Top Rear Stretcher.

7. Shelf Clips

Shelf clips are 5mm bore with a fluted plastic 3/8″ long stem and shelf lock mechanism. Shelved are adjustable on 2 1/2″ increments.

8. Doors

Doors are 3/4″ Birch MDF Core with .5mm edge banding.

9. Hinges

Hinges are fully concealed self-closing, 110 degrees opening.

10. Drawer Boxes

Drawer boxes have 3/4″ sides, 3/4″ ends cut from birch plywood and 1/4″ bottoms cut from birch plywood. Joints are 

butted and doweled with the bottoms recessed 1/2″ and routed 1/4″ into sides and ends. Bottoms are glued to sides.

11. Drawer Glides

Drawer slides are 3/4″ extension, 75-pound capacity, epoxy coated and side mounted.

12. Stretcher

Stretchers are made from 3/4″ and 4″ wide birch plywood.

13. Nailer

Nailers are made from 3/4″ and 4″ wide birch plywood.

WOOD SHAKER PANEL

1. Frameless

Ends are 3/4″ birch plywood with 5mm edge banding.

2. Tops & Bottoms

Top and bottom panels are 3/4″ thick birch plywood.  

Tops and bottoms are dadoed into the end panels.

3. Toe Kicks

Toe kicks shall be 5/8″ thick x 4″ tall birch plywood.

4. End Panels

End panels are 3/4″ thick birch plywood.

5. Adjustable Shelves

Adjustable shelves are 3/4″ thick birch plywood.

6. Back Panels

Backs are 1/4″ birch plywood. Backs are routed into End Panels, Bottoms, and Top Rear Stretcher.

7. Shelf Clips

Shelf clips are 5mm bore with a fluted plastic 3/8″ long stem and shelf lock mechanism. Shelved are adjustable on 2 1/2″ increments.

8. Doors

Shaker panels are 3/4″ maple rails and 1/4″ maple recessed center panels.

9. Hinges

Hinges are fully concealed self-closing, 110 degrees opening.

10. Drawer Boxes

Drawer boxes have 3/4″ sides, 3/4″ ends cut from birch plywood and 1/4″ bottoms cut from birch plywood.

Joints are butted and doweled with the bottoms recessed 1/2″ and routed 1/4″ into sides and ends. Bottoms are glued to sides.

11. Drawer Glides

Drawer slides are 3/4″ extension, 75-pound capacity, epoxy coated and side mounted.

12. Stretcher

Stretchers are made from 3/4″ and 4″ wide birch plywood.

13. ­­­­Nailer

Nailers are made from 3/4″ and 4″ wide birch plywood.